What is the autonegociation you’re talking about here ? I never owned a POE switch, I, of course, don’t need all the port, it was the cheapest POE switch I could find near me, everything else is like 250€ or more, or 150 for unmanagable. It won’t be ON often for the moment, I just wanted a POE switch to have fun with wifi AP and in the futur IP cameras!
Autonegotiation allows two devices, such as switches or network interface cards, to automatically exchange information about their capabilities and configure the best possible connection settings, like speed and duplex mode. This enables devices to establish a link with optimal settings for both. Without it, this needs to be done manually
I wrote a big thing about what I meant but this switch seems to have 802.11af so I may be wrong. Instead here’s a couple links to explain PoE better than I can
Not PoE+ so no autonegotiation. I’ll never fuck with passive poe switches again it is such a headache.
Do you really need 48 ports? That things gonna consume a lot of power even while idle.
What is the autonegociation you’re talking about here ? I never owned a POE switch, I, of course, don’t need all the port, it was the cheapest POE switch I could find near me, everything else is like 250€ or more, or 150 for unmanagable. It won’t be ON often for the moment, I just wanted a POE switch to have fun with wifi AP and in the futur IP cameras!
Autonegotiation allows two devices, such as switches or network interface cards, to automatically exchange information about their capabilities and configure the best possible connection settings, like speed and duplex mode. This enables devices to establish a link with optimal settings for both. Without it, this needs to be done manually
That switch does it with CDP.
Auto negotiation is not an L2 process. It is a physical layer process that is performed before a CDP or LLDP packet can be transmitted.
He’s not talking about speed/duplex auto negotiation. He’s talking about automatic power negotiation.
Pretty sure it also supports lldp
Yeah I already knew what autonego is, but this bit I didn’t understand, why POE/POE+ would affect auto nego ?
If I had to guess, negotiating POE voltage. Some stuff uses nonstandard voltage like some older ubiquiti gear
Oh, yeah okay, well, we’ll see if I encounter this issue!
I wrote a big thing about what I meant but this switch seems to have 802.11af so I may be wrong. Instead here’s a couple links to explain PoE better than I can
https://community.fs.com/blog/poe-switch-types.html
https://www.netgear.com/hub/business/network/active-or-passive/
In this case the 3750G is a standards based PSE using 802.3af. It should not have any issues powering modern network equipment up to 15.4W