atocci to 3DPrinting@lemmy.world • 10 months agoIt was not a loose thermistor after all, thank you for your help!media.kbin.socialimagemessage-square6fedilinkarrow-up160
arrow-up160imageIt was not a loose thermistor after all, thank you for your help!media.kbin.socialatocci to 3DPrinting@lemmy.world • 10 months agomessage-square6fedilink
minus-square@evidences@lemmy.worldlinkfedilinkEnglish7•10 months agoNext step do a PID tune, that looks fixed but your hotend graph should be way flatter than that with a new PID tune.
minus-squareatocciOPlinkfedilink2•10 months agoHow flat should I expect it to get? It’s sticking to +/-0.2° of the set temperature at the moment
minus-square@evidences@lemmy.worldlinkfedilinkEnglish2•10 months agoOk that fine then, thought that was more then it is.
Next step do a PID tune, that looks fixed but your hotend graph should be way flatter than that with a new PID tune.
How flat should I expect it to get? It’s sticking to +/-0.2° of the set temperature at the moment
Ok that fine then, thought that was more then it is.