• YAMAPIKARIYA
    link
    fedilink
    English
    11 year ago

    The ones with the rubber seals keep air in. A lot of new cars have those and a lot of cars with tire pressure sensors require them. Regular covers without the seal don’t keep air in obviously but I still wouldn’t trust the ones 3d printed by a random person because I don’t know what their QC is. The ones that go over original covers are the best either way.

    • ArumiOrnaught
      link
      fedilink
      01 year ago

      I’m a mechanic.

      The only thing the cap does is prevent things from damaging the core.

      The core is a small piece of metal, spring, and rubber seal. This does all of the work holding air in.

      The stem is the housing for the core.

      The cap is just protection.

      Do an experiment for me. Remove the core and put the cap back on. It will not hold air. Some threads and a piece of plastic that constantly gets removed will not hold air pressure.

      Yes, you should have a cap. The cap prevents damage.

        • ArumiOrnaught
          link
          fedilink
          01 year ago

          “helps prevent air from escaping from a slightly leaking Schrader valve.”

          “Helps” is doing a lot of work for you there. You have a damaged valve and it would need replaced.

          It also doesn’t help because the damage to the valve that would come from the moisture from the INSIDE of the tire.

          If you’re that worried just buy a 100 pack of valves cores for $5 and just swap them every time you change your tires. You’re vehicle will explode before you run out of cores, and then you don’t need to worry about replacing the $15 fancy caps ever.

          • YAMAPIKARIYA
            link
            fedilink
            English
            11 year ago

            Fair enough. I’ll concede. However, still rather pull that kind of prank with a cover that goes over the original valve.