I have a SanDisk 256GB extreme pro SD card for my camera. It works perfectly fine with the camera and with windows, but when I instert it into the card reader on linux (fedora 38) I can’t copy any files from it:

cp: Fehler beim Lesen von ‘…/DCIM/112_FUJI/DSCF2001.RAF’: Eingabe-/Ausgabefehler

Loosely translated:

cp: error while reading from ‘…/DCIM//112_FUJI/DSCF2001.RAF’: input/output error

the card is automatically mounted and shows up in the file explorer.

The fdisk command return this:

Festplatte /dev/sdg1: 238,27 GiB, 255835766784 Bytes, 499679232 Sektoren
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplattenbezeichnungstyp: dos
Festplattenbezeichner: 0xf4f4f4f4

Gerät       Boot     Anfang       Ende   Sektoren Größe Kn Typ
/dev/sdg1p1      4109694196 8219388391 4109694196  1,9T f4 SpeedStor
/dev/sdg1p2      4109694196 8219388391 4109694196  1,9T f4 SpeedStor
/dev/sdg1p3      4109694196 8219388391 4109694196  1,9T f4 SpeedStor
/dev/sdg1p4      4109694196 8219388391 4109694196  1,9T f4 SpeedStor

I tried following this: https://www.reddit.com/r/raspberry_pi/comments/habv0q/fixing_linux_sd_card_reader_issues_inputoutput/
but it didn’t change anything

Does anyone have any idea?

EDIT:
I used the wrong fdisk command. I used /dev/sdg1 as opposed to /dev/sdg which is the actual drive. Here is the output of fdisk -l /dev/sdg:

Festplatte /dev/sdg: 238,3 GiB, 255869321216 Bytes, 499744768 Sektoren
Festplattenmodell: STORAGE DEVICE  
Einheiten: Sektoren von 1 * 512 = 512 Bytes
Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes
E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes
Festplattenbezeichnungstyp: dos
Festplattenbezeichner: 0x00000000

Gerät      Boot Anfang      Ende  Sektoren  Größe Kn Typ
/dev/sdg1  *     65536 499744767 499679232 238,3G  7 HPFS/NTFS/exFAT
  • BentiGorlichOP
    1•1 year ago
    Dateisystem    Typ       1K-Blöcke    Benutzt  Verfügbar Verw% Eingehängt auf
/dev/sdg1      exfat     249806848     207872  249598976    1% /.../disk
    • Ashkan :Verfied:
      0•1 year ago

      @BentiGorlich
      Check for Errors: Run a file system check on the exFAT partition to identify and repair any potential filesystem errors.

      $ fsck.exfat -y /dev/sdg1

      Try mounting the SDcard with different mount options. Create a directory where you want to mount the card, and then use the mount command with specific options. For example:

      $ sudo mount -t exfat -o ro,umask=000 /dev/sdg1 /mnt/sdcard

      This mounts the SD card as read-only (ro) with a more permissive umask. Adjust the options as needed

      • BentiGorlichOP
        1•1 year ago
        sudo fsck.exfat /dev/sdg1
exfatprogs version : 1.2.1
/dev/sdg1: clean. directories 5, files 8

        I tried unmounting and mounting it the way you said, still same problem…

        • danielfgomEnglish
          1•1 year ago

          Have you tried testing with a different make of SD card? Just in case it’s the card…