I currently have a Dell laptop that runs Windows for work. I use an external SSD via the Thunderbolt port to boot Linux allowing me to use the laptop as a personal device on a completely separate drive. All I have to do is F12 at boot, then select boot from USB drive.

However, this laptop is only using 1 of the 2 internal M.2 ports. Can I install Linux on a 2nd M.2 drive? I would want the laptop to normally boot Windows without a trace of the second option unless the drive is specified from the BIOS boot options.

Will this cause any issues with Windows? Will I be messing anything up? For the external drive setup, I installed Linux on a different computer, then transferred the SSD to the external drive. Can I do the same for the M.2 SSD – install Linux on my PC, then transfer that drive to the laptop?

Any thoughts or comments are welcome.

Edit: Thank you everyone! This was a great discussion with a lot of great and thoughtful responses. I really appreciate the replies and all the valuable information and opinions given here.

  • @friend_of_satan@lemmy.worldEnglish
    17•5 months ago

    If the second internal ssd is there when windows boots, it will leave a trace. IMHO booting off the external drive is the best option if you want it to leave no trace on the windows partitions.

    Also, it’s possible any booted device will leave a trace in the bios or uefi boot logs, which your corporation may have configured to ship to their audit logs or something similar.

    • @StorageBOPEnglish
      3•5 months ago

      Thanks for the information. And good point - I will check to see if there’s any logs in the BIOS. Is there any way to know if boot logs are being sent? Is that a BIOS setting, or something that would be configured in Windows?

      • @friend_of_satan@lemmy.worldEnglish
        2•5 months ago

        I’m not familiar with windows so I don’t know exactly how to tell if the logs are being sent to a central log store. My assumption about how it would work is windows would have a capability that reads the UEFI boot logs and sends them with other windows system logs to a central log store. This feature is almost certainly built into windows. You may be able to open up a log inspection tool of some sort and search them. I’m really just guessing about these details from first principles though.