I work in a manufacturing environment and keep all the weird anomalies that turn up in our hardware inventory. I have screws and carriage bolts with either half-formed or non-existent threads, keps nuts without the built-in washer, fiberlock nuts without the nylon, washers that didn’t get the center hole stamped through all the way, screws with off-center heads, Phillips screws with a ghost of where the Phillips hole should be, zinc-plated screws that only got half-dipped, a pop rivet that had the pin pressed cross-wise through the shank, and my favorite piece is a ball bearing that was packaged with a bee nestled inside the hole.
My favorite one that I have found was a tape measure with exactly one error. The 2’ 0.5" mark was marked one sixteenth off. The entire rest of the tape measure was accurate.
I work in a manufacturing environment and keep all the weird anomalies that turn up in our hardware inventory. I have screws and carriage bolts with either half-formed or non-existent threads, keps nuts without the built-in washer, fiberlock nuts without the nylon, washers that didn’t get the center hole stamped through all the way, screws with off-center heads, Phillips screws with a ghost of where the Phillips hole should be, zinc-plated screws that only got half-dipped, a pop rivet that had the pin pressed cross-wise through the shank, and my favorite piece is a ball bearing that was packaged with a bee nestled inside the hole.
Are you able to share pics of your collection?
I’d be interested to see, too!
This, friend, is the fodder of which Dull Men’s Club is made. You cannot merely mention this collection; to not show it would be cruel.
My favorite one that I have found was a tape measure with exactly one error. The 2’ 0.5" mark was marked one sixteenth off. The entire rest of the tape measure was accurate.
Things I’d like to put in a sturdy balloon or wrap in aluminum foil and blast out of a canon for $200 Alex!