• HiddenLayer555@lemmy.ml
    link
    fedilink
    English
    arrow-up
    6
    ·
    edit-2
    1 day ago

    Or if line drying is not practical for you for whatever reason, consider a heat pump dryer as a compromise. It dries by dehumidification instead of heat (it condenses the moisture away and continuously blows dry air at your clothes) and uses a fraction of the energy (to the point that they use the standard North American 120v 15A plug and not the giant 240v one). Most models also don’t need to be vented so you won’t have a tube full of lint that can catch fire. Technology Connections likened them to accelerated line drying.

    • ReakDuck@lemmy.ml
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 day ago

      But you use them for much longer… so it might be close to the same maybe?

      I didnt do the calculation but someome should.

    • Andrew@mnstdn.monster
      link
      fedilink
      arrow-up
      1
      ·
      23 hours ago

      That’s what I have and it’s great! No exhaust to waste the hot air, just a water outlet/reservoir. It’s maybe a tad slower than a conventions dryer but it still dries an entire load in an hour or less, for way cheaper.
      The other factor that makes a massive difference is having a washer with a high speed spin cycle. Mine is 1200 rpm but I’ve seen up to 1800 rpm. Even 1200 rpm squeezes out way more water than your typically slow top-load machine.