Hi DIY punks! I need a little help with something. I’ve been trying all sorts of ways to home carbonate things as sustainably as possible. Most have not really worked out as intended, but I’m really really close on this latest attempt. This version is to connect a CO2 tank to a whipped cream dispenser.

Basically, the path from the tank looks like this:

…and the path from the dispenser looks like this:

So, I need an adapter to hook up the 3/8"-24UNF female to the mystery connection. It seems to start screwing in for a couple turns, but then won’t go any further, so my guess is that it’s the same diameter with different threading? Note that, in the link for the mystery hookup, I removed the TR21-4 at the end, because that’s for directly hooking up to a small tank. The mystery connection I’m talking about is the male threaded part you can see screwing into the TR21-4 connector.

It doesn’t seem like many people are doing this, or know what most of the industry standard connections actually are. See this thread here for example. Consequently, I have no idea if the mystery eBay hookup I bought even works, despite that being its entire purpose. The interior of the CO2 cartridge puncturing mechanism is a black box to me, so I’m just trusting this M22 connection is all that’s required. There’s definitely some kind of one-way valve in there, but hopefully it doesn’t somehow require being “pushed” by the cartridge itself.

  • Remy RoseOPEnglish
    2·
    1 year ago

    I think you’re right! Rather than find some kind of NPT to UNF adapter and throw yet another (potentially leaky) connection into the mix, I’m going to try replacing the “8mm male quick disconnect to 3/8 UNF female” with a “8mm male quick disconnect to 3/8 NPT female”. Specifically this one, I think. Wish me luck. an thank you!!

    EDIT: Or maybe this one.

    • faux@slrpnk.net
      2·
      1 year ago

      Thanks. I hope it works out!

      You seem like you know what you’re doing, but since you mentioned it:

      If you’re worried about leaks, you can use Nylog White on the threads. It’s food rated and works for your liquid and co2 gas connections. In theory, it’s also not supposed to harden and make your fittings impossible to unscrew.

      • Remy RoseOPEnglish
        1·
        1 year ago

        Oh I definitely have like zero idea what I’m doing, but hopefully I’ll learn a thing or two in the process lol. I will definitely be picking up some Nylog White, thanks!

        So, the 3/8 turned out to be WAYYY too big! I was just kind of naively taking it on faith because the listing said that’s what it was… I think it’s actually 1/8 instead? We’ll see once the new part arrives. Shame on me for trusting a thumbnail from AliExpress over, you know, a ruler 😅