• AllHailTheSheep@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      1
      ·
      49 minutes ago

      honestly the ports are whatever, I care more about the shitty TI PD controllers that always break and are programmed and not replaceable even by people who can replace the ports.

      • cmnybo@discuss.tchncs.de
        link
        fedilink
        English
        arrow-up
        12
        ·
        20 hours ago

        You need someone with a good hot air rework station and preheater. The full function USB C connectors have a second row of pins under the connector. They can’t be replaced with just a soldering iron.

          • boonhet@sopuli.xyz
            link
            fedilink
            English
            arrow-up
            5
            ·
            8 hours ago

            Still not user replaceable. Should be mandated as a separate board. It’s such an elementary thing to need to replace, USB-C ports that are plugged and unplugged on a daily basis need to be replaced eventually and there’s literally nothing stopping manufacturers from putting it on a separate board on a laptop if they can do it on phones.

              • boonhet@sopuli.xyz
                link
                fedilink
                English
                arrow-up
                1
                ·
                6 hours ago

                … What?

                The motherboard?

                That’s expensive to replace. Which is why the single most important plug on the device should be separately replaceable by a user with a screwdriver kit. Even apple used to do it that way for Magsafe, but unfortunately not for some usb c laptops.