But seriously, yesterday I cloned my main partition to a new laptop into an LVM volume on LUKS. Because I did not have any way of putting the new NVMe and old SATA SSD into one machine, I just used netcat over an ad hoc network.
nc -l 10000 > /dev/main/root
on the new Laptop and
cat /dev/sda3 | nc 10.31.69.1 10000 -q 0
on the old one. Worked perfectly. Now do that on Windows with builtin tools in live boots.
The rate was around 100MB/s. So I think the bottleneck was probably the read/write speeds of the SSDs, considering I have ~900Mbit/s down from speedtest.net, and this setup removed every hop except the old and new Laptops Gigabit Lan Port and the Gigabit patch cable between them. But with larger files/partitions over the internet this would probably help
I’d guess many distros would’ve had errors with preinstalled and configured helpers. Debugging them would be a pain
Gentoo, LFS, Arch etc. are installed manually, so one typically knows their system very well, including packages and configs they might have to hard configure interfaces etc. in
I just noticed I did not fully expand the fs on the target machine after shrinking it on the source machine to be sure it fits. No problem, growing ext4 file systems with resize2fs (indirect dependency of linux and base) works on mounted fs’ too, the Kernel just needs to be newer than 2.6 (so since 2003).
Took less than 1 second and works flawlessly, live. Conkys fs_free just jumped from 20 to 76. Still time to clear my caches.
Last time I tried to mess with Windows partition I tried to expand it to merge free space in my C:\ drive, but I couldn’t do that because Windows put the recovery partition in the middle, with no permission to remove it. Had to jump through a million hoops to get Windows to remove it.
I mean sure, Windows is easier in many ways. Not partition management. Anything but that. What a pain.
Ran into that a few years ago. I think I ended up fixing it by booting linux off a flash drive and moving the partitions around in that. It wasn’t to difficult after I just gave up trying to do it in Windows. Such a stupid problem.
I think I see a theme here. Doing fun normie stuff on iOS/ipadOS is easy. Doing technical stuff is usually completely impossible.
Doing technical stuff on Linux is easy as long as you know what you’re doing. Doing popular normie things on Linux is a bit hit-or-miss. Some things work perfectly, but other things are a royal pita.
Windows seems to be in between the two extremes in more than one regard. Microsoft seems to be working to find some sort of compromise in these things.
I think I accomplished a similar effect on my first linux distro a long time ago with a program called “compiz” (iirc). “I’m so frickin 1337,” I whispered under my breath. Nobody cared except me, though, lol.
Yep, same! Some of my friends have told me it’s a bit “silly” for me to have it enabled - but there’s plenty of bad things that occur on a daily basis in my life, I do not think there’s a single problem with having some wobbly windows as a small vice to enjoy haha.
I remember being endlessly entertained by the rotating cube animation between workspaces in the old Beryl implementation.
I told my wife, “but does your Windows do this?” Followed by rotating the cube. She was like, “I don’t care.” And that was that.
I shall tell this story to my grandkids.
Wow, that sums up my Linux life pretty well actually
Does your Windows do this? *doesn’t crash*
But seriously, yesterday I cloned my main partition to a new laptop into an LVM volume on LUKS. Because I did not have any way of putting the new NVMe and old SATA SSD into one machine, I just used netcat over an ad hoc network.
on the new Laptop and
cat /dev/sda3 | nc 10.31.69.1 10000 -q 0on the old one. Worked perfectly. Now do that on Windows with builtin tools in live boots.
Next time you could even add gzip or some other compression and save yourself a bit of time and bandwidth.
The rate was around 100MB/s. So I think the bottleneck was probably the read/write speeds of the SSDs, considering I have ~900Mbit/s down from speedtest.net, and this setup removed every hop except the old and new Laptops Gigabit Lan Port and the Gigabit patch cable between them. But with larger files/partitions over the internet this would probably help
More like do that in Windows with any tools. It doesn’t like being moved to different hardware one bit.
The only problems with my Arch install were
Btw detected
I’d guess many distros would’ve had errors with preinstalled and configured helpers. Debugging them would be a pain
Gentoo, LFS, Arch etc. are installed manually, so one typically knows their system very well, including packages and configs they might have to hard configure interfaces etc. in
I just noticed I did not fully expand the fs on the target machine after shrinking it on the source machine to be sure it fits. No problem, growing ext4 file systems with resize2fs (indirect dependency of linux and base) works on mounted fs’ too, the Kernel just needs to be newer than 2.6 (so since 2003).
Took less than 1 second and works flawlessly, live. Conkys fs_free just jumped from 20 to 76. Still time to clear my caches.
Last time I tried to mess with Windows partition I tried to expand it to merge free space in my C:\ drive, but I couldn’t do that because Windows put the recovery partition in the middle, with no permission to remove it. Had to jump through a million hoops to get Windows to remove it.
I mean sure, Windows is easier in many ways. Not partition management. Anything but that. What a pain.
Ran into that a few years ago. I think I ended up fixing it by booting linux off a flash drive and moving the partitions around in that. It wasn’t to difficult after I just gave up trying to do it in Windows. Such a stupid problem.
I think I see a theme here. Doing fun normie stuff on iOS/ipadOS is easy. Doing technical stuff is usually completely impossible.
Doing technical stuff on Linux is easy as long as you know what you’re doing. Doing popular normie things on Linux is a bit hit-or-miss. Some things work perfectly, but other things are a royal pita.
Windows seems to be in between the two extremes in more than one regard. Microsoft seems to be working to find some sort of compromise in these things.
deleted by creator
I think I accomplished a similar effect on my first linux distro a long time ago with a program called “compiz” (iirc). “I’m so frickin 1337,” I whispered under my breath. Nobody cared except me, though, lol.
IIRC Compiz was a fork of Beryl or the other way around. I could be wrong though.
Last I checked you can still do the cube in kwin under plasma.
It was gone from Plasma for a bit, however it’ll be back in the next upcoming Plasma 6 release!
at least wobbly windows stuck around though. i’ve had that on for like 10 years
Yep, same! Some of my friends have told me it’s a bit “silly” for me to have it enabled - but there’s plenty of bad things that occur on a daily basis in my life, I do not think there’s a single problem with having some wobbly windows as a small vice to enjoy haha.
Woohoo!
Life in a nutshell…
check wayfire :)
https://github.com/WayfireWM/wayfire
Oh yeah! That’s ticking a few boxes for when I eventually switch from X(11).
I don’t care.
I wonder if thats based on a real story…
Here is an alternative Piped link(s):
I don’t care
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source; check me out at GitHub.
There was a jailbreak tweak for iOS that mimicked Beryl, it was so cool.