Network design. I started my homelab / selfhost journey about a year ago. Network design was the topic that scared me most. To challenge myself, and to learn about it, I bought myself a decent firewall box with 4 x 2.5G NICs. I installed OPNsense on it, following various guides. I setup my 3 LAN ports as a network bridge to connect my PC, NAS and server. I set the filtering to be applied between these different NICs, as to learn more about the behavior of the different services. If I want to access anything on my server from my PC, there needs to be a rule allowing it. All other trafic is blocked. This setup works great so far an I’m really happy with it.
Here is where I ran into problems. I installed Proxmox on my server and am in the process of migrating all my services from my NAS over there. I thought that all trafic from a VM in Proxmox would go this route: first VM --> OPNsense --> other VM. Then, I could apply the appropriate firewall rules. This however, doesnt seem to be the case. From what I’ve learned, VMs in Proxmox can communicate freely with each other by default. I don’t want this.
From my research, I found different ideas and opposing solutions. This is where I could use some guidance.
- Use VLANs to segregate the VMs from each other. Each VLAN gets a different subnet.
- Use the Proxmox firewall to prevent communication between VMs. I’d rather avoid this, so I don’t have to apply firewall rules twice. I could also install another OPNsense VM and use that, but same thing.
- Give up on filtering traffic between my PC, NAS and server. I trust all those devices, so it wouldn’t be the end of the world. I just wanted the most secure setup I could do with my current knowledge.
Is there any way to just force the VM traffic through my OPNsense firewall? I thought this would be easy, but couldn’t find anything or just very confusing ideas.
I also have a second question. I followed TechnoTim to setup Treafik and use my local DNS and wildcard certificates. Now, I can reach my services using service.local.example.com, which I think is neat. However, in order to do this, it was suggested to use one docker network called proxy. Each service would be assigned this network and Traefik uses lables to setup the routes. ’
Would’t this allow all those services to communciate freely? Normally, each container has it’s own network and docker uses iptables to isolate them from each other.
Is this still the way to go? I’m a bit overwhelmed by all those options.
Is my setup overkill? I’d love to hear what you guys think! Thank you so much!
Right, then you’ll probably want to do something similar to what I’m planning next, which is creating a small “DMZ” VLAN, for the public facing things, and being very specific about the ACLs in/out, default deny anything else.
The few things I allow public access to are via Nginx Proxy Manager, using Authelia for SSO/2FA where applicable. I’m intending to move that container into a dedicated VLAN that only allows port 443 in from anywhere (including other VLANs), and only allows specific IP/port combinations out for the services it proxies.
I don’t even intend to allow SSH in/out for that container. I can console in from the Proxmox management console if required.
Sounds like I’ll do just that, thanks. Should I move all public facing services to that DMZ or is it enough to just isolate Traefik?
Just the stuff that’s being accessed directly, so if anything’s only going to be accessed via your Traefik server from outside, leave them where they are. That way, any compromise of your Traefik server doesn’t let them move laterally within the same VLAN (your DMZ) to the real host.
I see, thanks for clearing that up.