• LinkOpensChest.wav
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    This is good information, thanks. And yeah it works like 80% of the time, but I can really tell when it’s not working, and when I go outside I notice the fans not spinning. So we’ll probably keep using it until it absolutely needs to be done lol

    • Froyn@kbin.social
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      I sell parts for residential HVAC. If your outside motor is humming, try starting it with a stick. If the motor starts with a little push, it’s more likely a capacitor instead of the contactor/relay. Capacitors are fairly cheap and easy to replace.

      • LinkOpensChest.wav
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        I’ll try that, thanks. But I’m sure it would still be ungodly expensive since I’d not dare replace it myself.

    • 0x4E4F@lemmy.fmhy.mlOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Yeah, the external unit is the problem. In most cases, the switch/relay for the fan and the compressor are the one and the same, so if the fan doesn’t work, the compressor probably doesn’t work as well. If the compressor works, but the fan doesn’t, you’ll probably hear just a buzzing sound from the external unit. Still, it will cool, just a lot less. The fan is needed to draw the hot air from the raidiators, cool the colling liquid down and pass the cold liquid back to the internal unit, so it can use it to cool the air inside.

      An AC is basically like a big energy exchange system. Draw energy (heat) from one end, release it at the other, but in order to do that, you need both fans and radiators to be present at both ends, cuz the heat exchanger in this case is air.