3d printed threads and snap connectors are nice, but M3 bolts and nuts are more robust and look dope. They also make the model easier todesign print, since you don’t have to worry about tolerances as much.

STEP/STL and instructions available here: www.printables.com/model/548770-master-spool

  • kek_w_lolOPEnglish
    3·
    1 year ago

    Just don’t try to use it with esun filament. It does not work. Even without the cardboard insert. I tried :(.

    • 5ubieee@slrpnk.netEnglish
      3·
      1 year ago

      I’ll probably take the step and make a couple different variations with different diameters, I have a couple different brands and I’m sure they all have slightly different diameters :D

      • kek_w_lolOPEnglish
        2·
        1 year ago

        Was going to do that but kinda broke rn and my SO is already complaining about the amount of filament :). Please send me a link on printables if you do it.

        Most refills follow the master spool standard anyway. Esun just had to be special.

        • 5ubieee@slrpnk.netEnglish
          2·
          1 year ago

          I got 2 spools of inland and a couple i got from a generic brand on taobao, I’m pretty sure both are non-standard as well. The last spool I printed off printables had a really nice table with dimensions for a bunch of different filament brands if you’re curious

          • kek_w_lolOPEnglish
            2·
            1 year ago

            Master spool standard ftw. Fiberlogy is definitely compatible if you’re curious.

    • IMALlama@lemmy.worldEnglish
      1·
      1 year ago

      Variation in refill winding diameter really put me off the master spool concept a few years ago. I printed a well reviewed spool, bought a refill, and the refill was wound around a smaller radius than the spool so it wouldn’t fit. Sounds like that hasn’t changed much?

      • kek_w_lolOPEnglish
        1·
        1 year ago

        Fuck any manufacturer who makes their own standard. We have one. We don’t need a new one. Vote with your wallet. Unless the manufacturer specifies they are compatible, don’t buy it. Simple and easy.

        • IMALlama@lemmy.worldEnglish
          1·
          1 year ago

          That’s the thing, is there even a standard? The thing that got me is everyone saying “master spool”, which makes one think that you can print any “master spool” and buy any “master spool refill”, but that is not what I experienced.

          • kek_w_lolOPEnglish
            1·
            1 year ago

            Master spool standard has mesurements the refill is supposed to fit in. The spool is printable on a 200x200 bed, that’s why it’s so popular. Every website I have seen, they state ckearly when compatible so idk.