• BarqsHasBite@lemmy.caOP
    link
    fedilink
    English
    arrow-up
    9
    ·
    edit-2
    1 year ago

    I say that Metric is like color vision. You can see things in whole new and easier ways. People in USC can’t understand what others see and insist things are just fine the way they are. Thus the “no one ever does that”, “why would you need to know that”, “who cares”, etc.

    • sanpedropeddler@sh.itjust.works
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      It is true that no one ever does that though. That doesn’t mean its not a problem, but I’ve never seen anyone do it. If you need to do something like that and you have a brain, you use metric. Just because its flawed doesn’t mean imperial should be completely abolished though. What needs to stop is people thinking imperial is better than metric somehow. Aside from that, its just a weird flawed measurement system.

      • lolcatnip@reddthat.com
        link
        fedilink
        English
        arrow-up
        4
        ·
        1 year ago

        We don’t use imperial in the US, we use US customary. Some units have different sizes in imperial. For example, a US pint is 16oz and an imperial pint is 20oz.

    • Captain Aggravated@sh.itjust.works
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      I’ll tell you something I do as a woodworker a lot that metric isn’t great for: divide by powers of two, three or four. I’ve got some boards milled up 3/4" thick. I’m going to join them with a bridle joint, that means cutting the middle third out of one and the outer two thirds from the other. So each of the remaining “tongues” are each 1/4" thick. 3/4" is approximately 20mm. That’s a nice metric number, a multiple of 10. Let’s cut that same bridle joint in 20mm stock. What’s a third of 20mm? Can you come point to 6.6666mm on my metric tape measure here?

      Don’t pretend base ten doesn’t do stupid things too.

      • barsoap@lemm.ee
        link
        fedilink
        arrow-up
        6
        ·
        edit-2
        1 year ago

        Can you come point to 6.6666mm on my metric tape measure here?

        Yes: For woodworkers, it’s identical to 6.5mm, accurately eyeballed at between 6 and 5mm. Don’t pretend you’re a machinist. Does your tape measure even have a vernier scale. Does it make satisfying clicks when measuring. If you have a slip instead of interference fit just dump one piece in water for a second it’ll be fine.

        • angrystego@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          To be more precise, it should be rounded as 6.7 cm, accurately eyeballed at between 6.6 cm and 6.7 cm.