I am currently looking into getting a keyboard to use in jamming sessions. I have so far been partial to Roland GO:KEYS 5 (this over the 3 due to the additional inputs and an acceptable imo price difference). This (around 500 EUR) is around the max I want to give for it.

But, as far as I can tell, it does not have a proper loop function. It has a layered recording-function, but this would require me to play through the full song.

So I have two questions:

  1. Are there any keyboards anyone of you would recommend in roughly the same price range that has a looper?

  2. Could I use my Boss RC-5 for this, plug the keyboard into input A and plug it back into the keyboard from output A? I would like to avoid buying a new speaker for this, and tge loop pedal would also be connected to my guitar and to the amp.

  • cyberwolfie@lemmy.mlOP
    link
    fedilink
    arrow-up
    4
    ·
    11 days ago

    I’d want to be able to use it without, yes. I also want to play via DAW, but I already have a more stationary 88-key setup where I would do that anyway. Maybe I would prefer to use a DAW for jam sessions when I get more experience with it, but right now I am very much a beginner (I want to learn Ardour)

    • trashcan@sh.itjust.worksM
      link
      fedilink
      arrow-up
      3
      ·
      edit-2
      11 days ago

      I don’t have something to recommend unfortunately. I’m most comfortable in the DAW. I’ll be following this thread however.

      Edit: the DAW I know my way around doesn’t have a good solution.

      • cyberwolfie@lemmy.mlOP
        link
        fedilink
        arrow-up
        1
        ·
        10 days ago

        Alright, cheers :) Which DAW is it that you are using, by the way?

        After some more research, I think my loop pedal idea with using the keyboard as a speaker will work. The GO:KEYS 5 has 1/4 in line im and out, and as I understand about the pedal I should be able to sepaeate L and R inputs and direct to different amps/speakers. So far I’ve only used it with guitar and amp, so need to make sure I’ve not misunderstood anything before buying.

        • trashcan@sh.itjust.worksM
          link
          fedilink
          arrow-up
          2
          ·
          edit-2
          8 days ago

          I went from Reason to Bitwig Studio. It’s laid out similarly to Ableton Live but with some great QoL features and design paradigms like their open modulation system.

          • cyberwolfie@lemmy.mlOP
            link
            fedilink
            arrow-up
            2
            ·
            6 days ago

            I want to go FOSS, so I’ve tried LMMS and Ardour, both only briefly. Found out that Ardour is probably more what I am going for as I want to connect a guitar directly and record as well, and as far as I could tell, I would have to make guitar recordings outside of LMMS and bring them in after.

            I spent a little time trying to get my piano, guitar and MIDI-controller set up with Ardour, which I almost got working (just the control buttons on the MIDI controller (Nektar Impact LX25+) that I couldn’t get any response from). I struggled with plugins though, tried yabridge, couldn’t get it to work, and figured it was because I was running the flatpak version of Ardour. So I am planning on buying the precompiled binaries from Ardour to also support development, but I want to wait until I have some time to get properly going. My mistake might also have been to bite off a bit more than I could chew from the get-go, and that I should start by following some tutorials to get to know the software better before I start interfacing everything.

            • trashcan@sh.itjust.worksM
              link
              fedilink
              arrow-up
              1
              ·
              edit-2
              6 days ago

              My mistake might also have been to bite off a bit more than I could chew from the get-go, and that I should start by following some tutorials to get to know the software better before I start interfacing everything.

              That could be it. Don’t forget limitations lead to creativity.

              I went with Bitwig because it’s natively Linux compatible, supports 32-bit and 64-bit VST2, VST3, and CLAP plugins with multiple sandboxing options making a plugin crash a nonissue.

              A DAW may be the one thing I am willing to go for proprietary. It’s the most expensive software I have purchased for hobbyist use and it’s rewarding every time I open it. I went with the simplicity of having things “just work” for once.

              But that said with all the options I do get lost in rabbit holes and would probably finish more tracks with fewer choices.