Frankly, I could have fun with that as a full grown adult in 2026!

Ad above was a Tyco set. The first commercial slot cars were sold by Lionel in 1912,

Lionel slot cars 1912

In the 50’s and 60’s, slot car racing arcades were popular, where people would go to race or watch others race. They still exist today of course, just not in the same popularity and prominence as then.

Vintage track. Also, a greater than average number of ceiling tetrahedrons.

Vintage slot arcade

Group of 1960’s ladies having a blast,

Vintage slot arcade

8-way track,

Vintage slot arcade

  • arotrios@lemmy.world
    link
    fedilink
    English
    arrow-up
    20
    ·
    edit-2
    1 day ago

    Holy shit - I had that Tyco set. Was a huge xmas gift to me and my little brother. It was an amazingly good track, but it took a while to setup and make sure all the connections on each piece of track were carrying current. This usually mean getting shocked while you tried to figure out why the cars would suddenly skid to a stop on a straightaway.

    The cars went waaaaaaay too fast, and they were only connected to the track by the thin copper peg on the bottom of the chassis, near the front wheels. This meant they would fly off the track the moment you hit the controller too hard on a curve, and the controllers were insanely sensitive.

    Many crashes, many shocks. Good times.

    • hemko@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      8
      ·
      1 day ago

      Wasn’t there brushes on the bottom of the car for the electricity, and then a peg for keeping on the track?

      • arotrios@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        ·
        1 day ago

        Yeah, that little copper peg was for keeping it on the track (did not do a great job of it). There were two thin strips of metal that would touch the exposed copper current lines embedded on the plastic track - I believe they were ahead of the front wheels and roughly equivalent to their width if I remember correctly.

        • EnmebaraGuesser@piefed.caOP
          link
          fedilink
          English
          arrow-up
          5
          ·
          edit-2
          1 day ago

          Looks like your memory is right. I don’t know if this one is the same scale, since there are multiple scales of them, but the ones I saw look all similar-ish, with two metal strips like this.

          Tyco slot car

          • arotrios@lemmy.world
            link
            fedilink
            English
            arrow-up
            4
            ·
            1 day ago

            That looks like it! For some reason, I remember the peg being copper (or copper colored), but it was 40 years ago, so my memory may be fuzzy. That red spot on the engine was a groove cut in the cylinder and was what could pinch you if you touched it with the motor running.

            No steering, just pure acceleration and prayers that the peg and the tires would hold the track on the curves.

    • EnmebaraGuesser@piefed.caOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 day ago

      I’ve never seen one of these but it looks to me like you should be able to do some badass custom layouts too, with the same segments.

      • arotrios@lemmy.world
        link
        fedilink
        English
        arrow-up
        9
        ·
        1 day ago

        Absolutely - that was the biggest attraction - building the track. The stackers went up to 3 stories, so you could build real under and overpasses. We’d add cardboard boxes for tunnels.

        There were also custom lane changes. There were certain straight sections that had the groves cross in an X, and would make the car flip to the other lane. Of course, if you hit that section with both cars racing neck and neck, you’d get amazing crashes, sometimes hard enough to snap the plastic top cover off the car.

        That was another fun thing - racing with top off. The tops of the cars came off with a snap, and we’d often pretend we were doing crash derby with the stripped down cars smashing into each other. You could actually see the electric motor spin, and put your finger on it while it ran… although you ran a risk of getting pinched and losing some skin.

        • calliope@retrolemmy.com
          link
          fedilink
          arrow-up
          2
          ·
          1 day ago

          The cars stuck amazingly well to the track with the tops off too!

          The little cars would go so fast it was crazy. Add the top and it changed the whole aerodynamics (obviously). It was really surprising to me at the time how much it mattered.

  • Hikermick@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    18 hours ago

    292.72 in today’s dollars according to Google AI.

    My neighbors owned a hobby store with one of those big fiberglass tracks that took up half the shop.

  • spinnetrouble@sh.itjust.works
    link
    fedilink
    arrow-up
    6
    ·
    1 day ago

    I always wanted a slot car set like my neighbors had. The Cliff Hangers set was much smaller than this one, but it had the vertical wall climb that was so badass. My parents never went for it, I think because they were trying to nudge me away from “boy” toys (and they definitely didn’t want the setup and cleanup of a slot car set).

    My husband offered to get me a figure-8 set, but two drivers and a short figure 8 track just didn’t have the pull the Cliff Hangers or the ginormo set did. (And we didn’t want the setup and cleanup of a slot car set.)

    • SGforce@lemmy.ca
      link
      fedilink
      arrow-up
      2
      ·
      23 hours ago

      I had it! To be honest, the vertical parts were kind of gimmicky and while not necessarily flimsy couldn’t stand up to our shenanigans. Slamming the cars into them broke those parts pretty quickly. But by that point I was already saving up and buying track pieces at garage sales and setting up a massive road course.

  • reddig33@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 day ago

    The question is, would your parents be willing to dish out almost $300 for that Tyco set in today’s money?

    • arotrios@lemmy.world
      link
      fedilink
      English
      arrow-up
      6
      ·
      1 day ago

      Mine were, but I think we got it in 83, so my folks might have gotten it on discount or used. They were also both working, and my dad was in tech (back in the punchcard days), so while we weren’t rich, we weren’t struggling. Note it was for two kids, and was a big gift (I think the only other thing we got that year was socks). To put it more in context in today’s money, it would be more like spending $100 a kid on one big xmas gift for the two of them.

      Plus, this was before video games. This shit was HOT back then. The only thing you could get that was cooler was Star Wars figures, and those didn’t GO. This was like getting a PS5 for Christmas for me and my bro.

  • Davel23@fedia.io
    link
    fedilink
    arrow-up
    3
    ·
    1 day ago

    There was a place in Brooklyn called Buzz-A-Rama, it was the last slot car racing place in New York. My dad used to take me there in the '80s, it was open until 2021.

    • EnmebaraGuesser@piefed.caOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 day ago

      Sort of sad to see them go. I understand it’s probably not easily viable in an age of advanced home video games, where you need to pay rent on an entire building and pay salaries and everything to run a slot car venue.

      Still kinda sad.

      • Davel23@fedia.io
        link
        fedilink
        arrow-up
        4
        ·
        1 day ago

        The original owners died (they were anti-vaxxers and died of COVID, who’d a guessed?) and their son decided to shut the place down. Can’t really blame him.