I’m guessing that’s because you’re using software decode? If you use HW decode it runs wonderfully in my experience. I could play raw 1080p h264 or VC1 Blu-ray rips over the network just fine**. You have to pay for VC1 and MPEG2 IIRC — otherwise it will try to play in software which is no good. This was an rpi3 with Kodi on Raspbian.
Interestingly I believe they removed MPEG2 and VC1 HW support in the 4, so those files play better on a 3 than a 4. But if your media is in h264 and you use a supported player it should work great on a 4.
** I think NFS worked best, and of course over Ethernet. Maybe http also worked (iirc samba would stutter occasionally).
Another board that can’t play 1080p? Fantastic!
What do you mean? It does 4k @ 60hz.
Video? Not just screen resolution?
I have a RPi3 and can’t play anything above 720p.
So you’re comparing the new pi with one 2 generations back that runs at 1/4th the performance and assuming they work the same?
I’m guessing that’s because you’re using software decode? If you use HW decode it runs wonderfully in my experience. I could play raw 1080p h264 or VC1 Blu-ray rips over the network just fine**. You have to pay for VC1 and MPEG2 IIRC — otherwise it will try to play in software which is no good. This was an rpi3 with Kodi on Raspbian.
Interestingly I believe they removed MPEG2 and VC1 HW support in the 4, so those files play better on a 3 than a 4. But if your media is in h264 and you use a supported player it should work great on a 4.
** I think NFS worked best, and of course over Ethernet. Maybe http also worked (iirc samba would stutter occasionally).