I have the following questions about AMD:

  1. If I want to switch to an AMD GPU, do I need to change my motherboard? Or do all motherboards work with both AMD and Nvidia GPUs?
  2. Do I need to buy an AMD CPU as well? Or can I use my existing Intel CPU with an AMD GPU?
  3. How does the AMD GPU naming convention work? More specifically, what is AMD’s equivalent of the RTX 4070? (I want to get a 4070 but I figured it would be a good idea to research AMD’s options)
  • @empireOfLove
    link
    English
    5
    edit-2
    1 year ago
    1. All motherboards work with all PCIe GPU’s. PCIe is a platform agnostic standard. If your motherboard is old enough that it does not support PCIe 4.0 though, you should definitely upgrade, because that probably puts your CPU as being old enough to bottleneck a 4070.

    2. Again, platform agnostic. there are some internal benefits for running all-AMD hardware, but they’re minimal. Intel will work perfectly well. Refer to point 1 to see if you should upgrade or not.

    3. Generally they mirror Nvidia’s numbering scheme. Aka, the x900 GPU’s are the halo card, followed by x800, x700, x600.

    Unfortunately AMD’s current lineup is a little behind in the midrange market. Their only midrange cards in the current lineup are last-generation RDNA2 6000 series cards aside the 4060-targeted RX 7600xt, which puts the closest AMD performance-equivalent to the 4070 to be the RX 6900xt/6950xt on the high end and the RX6800 a little below. The 6950xt is currently floating around that 600-700$ pricepoint that the 4070 is at, and can frequently beat the 4070 in pure raster (non-raytrace) performance. The 6800xt can be found for <$550, at least while supplies last- they are NOT producing any more of those GPU’s.

    Raytracing is significantly worse though, it uses more power, and AMD’s software stack (frame interpolation, recording/encode, etc), while usable, just isn’t quite up to the same par as Nvidia’s. So if any of that really matters to you, I unfortunately have to recommend the 4070.
    However, if you can handle those downsides and just need to play traditional raster games, please please buy the AMD card and do not feed Nvidia’s idiotic greedy monopoly machine. Jensen is smoking crack and the last thing anyone needs to do is feed that man’s overinflated head more fucking cash.

    Or even better- wait until 2024 if you are not in need of an immediate upgrade. Intel’s first generation Arc GPU’s had a rough launch but have improved massively over the past year with driver upgrades, to the point of being fantastic first generation products. Their second generation Battlemage GPU’s are expected at the beginning of 2H 2024 and could potentially be a killer value in the midrange segment.

    • @Poopfeast420@feddit.de
      link
      fedilink
      English
      21 year ago

      However, if you can handle those downsides and just need to play traditional raster games, please please buy the AMD card and do not feed Nvidia’s idiotic greedy monopoly machine. Jensen is smoking crack and the last thing anyone needs to do is feed that man’s overinflated head more fucking cash.

      Most of what you wrote seems fine, but I don’t agree with this, since we’re seeing, that AMD is not much better than Nvidia, and will try to fuck over consumers as much as possible themselves.

      Unless OP needs a new card right now, I’d recommend waiting as well.

  • @TassieTosser@aussie.zone
    link
    fedilink
    English
    11 year ago

    Do I need to buy an AMD CPU as well? Or can I use my existing Intel CPU with an AMD GPU?

    You don’t need an AMD CPU. Smart Access Memory (aka Resizeable BAR), which is what you’d be seeing if you try to research matching AMD CPUs and GPUs work with any combination of CPU and GPU. Yes, even nVidia GPUs have ReBAR now. SAM is just AMD’s marketing term for ReBAR.

    AMD is currently lagging behind in the temporal upscaling department. This would be your DLSS, XeSS, FSR, and game engine-specific temporal upscalers. DLSS3 is currently the best of the lot but is locked to nVidia cards because of the way it works. It requires the Tensor cores only found on nVidia GPUs. The main reason to use these upscalers at the moment is to get usable FPS when running Ray Tracing at high resolutions. It can also extend the life of your GPU by allowing it to render at lower resolutions and upscale to higher resolutions. Ie 1080p -> 1440p. Fair warning that nVidia’s DLSS implementations aren’t very backwards compatible since they rely heavily on GPU architecture. FSR and XeSS are theoretically platform agnostic but XeSS is better optimised to be run on Intel’s ARC.

  • Jordan Lund
    link
    English
    1
    edit-2
    1 year ago

    Other people are giving good advice, but I’d also add, if you want to compare graphics cards, really check out the GPU benchmark.

    Figure out what your budget is, then go with the highest scoring card in your budget range.

    https://www.videocardbenchmark.net/high_end_gpus.html

    The RTX 4070TI scores 31,678, near the top of the high end charts and for $789, it had better!

    The Radeon RX 7900 XTX scores SLIGHTLY higher at 31,767, but it’s over $200 more expensive at $999.

    So are those 89 extra points of performance worth an extra $220? ($2.47 a point?) No. The performance on both cards is essentially identical.

    Looking at the “normal” 4070 (not TI) it scores 27,035 at $599.

    The Radeon RX 6950 XT scores almost 2,000 points higher at 28,888, and it’s only $29 more. (1,853 points for $29 = $0.0156 per point).

    That’s a no-brainer, PROVIDED a $600 card is in your budget.

    Basically if the performance is within the margin of error, go with the cheaper card.

    If the price is within the margin of error, go for better performance.

  • ModularTable
    link
    fedilink
    English
    01 year ago
    • For 1, all motherboards should work with both AMD and Nvidia GPU.
    • For 2, you can mix and match, there are some benefits to using both an AMD CPU and GPU, namely Smart Access Memory
    • For 3, AMD’s naming is confusing as hell but basically they used to have R3, R5, R9, etc for different tiers of cards, but now everything goes under the “RX” naming prefix.
    • They use the X and XT suffix to differentiate the fastest versions of the same tiers of cards or revisions of cards. (Kind of like Nvidia’s TI suffix)
    • The equivalent of a 4070 is a RX 6950 XT as far as I’m aware.
    • @beefcat@beehaw.org
      link
      fedilink
      English
      01 year ago

      “Smart Access Memory” is just AMD’s marketing term for Resizable BAR. You don’t need an AMD CPU or GPU to make use of it.

      • ModularTable
        link
        fedilink
        English
        11 year ago

        Good to know! Didn’t realize at first it was just their marketing term for Resizable BAR lol TIL