Decided to try my hand at a pickup swap. I ordered Seymour Duncan Mark Holcomb Alpha and Omega pickups, an adjustable soldering iron, and watched about half a dozen YouTube videos.

I’m fairly handy, but I’ve never soldered anything before. This was an entirely new experience for me, but I figured worst case I could take it to a shop and have them fix it. So let’s get started!

Strings off Strings off!

Going to change the strings anyway, so they come off first. It’ll make things way easier to deal with, too.

Back cover off Pull the back cover and check it out.

I pulled out the tone pot, which is a push/pull unit on the PRS CU24SE, and compared the wiring diagram I downloaded from PRS and the one that came in the package with the new pickups. I had a pretty good idea what I was looking at, so it was time to start taking things apart.

Stock wiring This is the stock wiring. Going to start desoldering things now.

Bridge pickup out Bridge pickup is out!

Stock pickup came out very easily. Just heated up the solder blob and out she came.

New pickup wired in

New bridge in.

Took me a few tries to get the new solder blob nice and neat, but it went in very easily as well.

Pickup in.

Tested it out, and the coil splitting works! Got it on the first try. The instructions are perfect!

Neck pickup in

Now for the neck.

First one was easy, so I was more confident with the neck pickup.

Mounted up and tested out well.

All mounted up and tested out. Everything is awesome!

Tidy up the wiring

Tidy up the wiring a little and close up the back. Put the new strings on, level and set the pickup height, then let it rip!

All done

That’s it! All done. I was really surprised at how easy it actually was. If your thinking about trying it out, go for it.

The new pickups are phenomenal, and I feel like they’ve elevated the rest of the guitar. The PRS SE lines are really good as is, but I felt like the pickups were a weak link in an otherwise awesome guitar. The Alpha/Omega set are really good. A lot of clarity in the cleans while keeping articulation with distortion. Great addition overall.

  • ArtVandelay@lemmy.worldM
    link
    fedilink
    English
    arrow-up
    5
    ·
    1 year ago

    I did the same in my PRS SE with the diMarzio crunchlab/liquifire set. I agree, these are great modding guitars.

    • CarrierLostOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      The SE line is an awesome platform, but the electronics are for sure a weak point. They’re GOOD, but not GREAT. A pickup swap is a great step forward.