• @Dima
    link
    203 months ago

    Why even bother having swap at that point?

      • @PrefersAwkward@lemmy.world
        link
        fedilink
        English
        183 months ago

        I think the question is: if a person is going to make such a tiny swap, why even use swap?

        Such a small swap is unlikely to save a system from memory problems and it’s does not seem likely to make a noticeable difference in performance when it’s only able to swap out small amounts of memory.

        Why wouldn’t one just put in larger ZRAM or a larger Swap with a reduced swapiness?

        If I have a raspberry pi with 1 GB ram, I don’t think a 2 MB swap is worth bothering with.

        • @marcos@lemmy.world
          link
          fedilink
          153 months ago

          Swap is not intended to save a system from memory problems. And absolutely not fit for that purpose.

          And if you are using that memory, it will make a noticeable difference in performance.

          But for it to have any impact at all, you need the default (high) swapiness. If you reduce it, that partition will become useless.

          Anyway, I don’t recommend you put any swap at your PI’s SD card.

          • @PrefersAwkward@lemmy.world
            link
            fedilink
            English
            83 months ago

            I wouldn’t put swap on an SD card, no. Even if it had an NVME, it seems like putting up at least a double-digit percent would be more effective than 1%.

            Also, since 6.1, swap has been a lot better, with MGLRU. ChromeOS gets away with paltry amounts of RAM due to swapping. So classic overcommitting seems fine as long as you don’t run into situations where more RAM is active at once than is available by hardware.

            • @marcos@lemmy.world
              link
              fedilink
              53 months ago

              4 GB are 4 GB, it doesn’t matter how much memory you have at total.

              The only usage of swap where you should even look at your RAM size is for on-disk sleeping. And most people don’t do this anymore.

      • SonotsugipaaOP
        link
        fedilink
        English
        53 months ago

        Disabling swap does not prevent disk I/O from becoming a problem under memory contention, it simply shifts the disk I/O thrashing from anonymous pages to file pages

        While the rest of that post matches my understanding of swap (I still think 1GB is next to useless in this case), that summarized point perplexes me.

        What non-special file(s) does the kernel write to and read from, and how does it know how much space to use?