A Tesla Cybertruck driver was killed in what appears to be the first reported fatal crash involving the electric pickup truck, which has yet to undergo third-party crash testing.

  • NotMyOldRedditName@lemmy.world
    link
    fedilink
    arrow-up
    47
    ·
    edit-2
    4 months ago

    The cybertruck front is actually lower than a lot of other comparable trucks, and has a slanted hood, both things that will reduce pedestrian fatalities compared to some of the other flat neck high bricks out there.

    It’s just a matter of does the truck cut them in half or not with that front edge of which we don’t have any data on yet.

    Eg. This is beside a f150 raptor

    • TranscendentalEmpire@lemm.ee
      link
      fedilink
      arrow-up
      40
      ·
      4 months ago

      Unfortunately the materials really matters with pedestrian motor vehicle accidents. When I first started working in orthopedics and rehabilitation, metal fenders and bumpers were still regularly on the roads and causing very specific injuries.

      When a metal bumper hits you, it doesn’t just cause blunt force trauma, it tends to shear muscle away from the bone. There was a specific ankle foot orthosis that was widely produced up until the early 2000s that was meant to replace calf muscles that were scooped off by metal bumpers.

      This truck is basically a giant flying wedge of stainless steel, I don’t see any pedestrian walking away from an accident with this monstrosity.

      • NotMyOldRedditName@lemmy.world
        link
        fedilink
        arrow-up
        9
        ·
        edit-2
        4 months ago

        Any thoughts on how the plastic bumper at the bottom might impact that? Do you think that might make any difference at all? You’re still going to hit the metal parts regardless, but that initial impact might be plastic, (edit: and then start the forces of throwing you onto the hood)

        I really wanna see a 3rd party agency test this so we can finally get some answers, but with the lower front/angle, but the metal/front edge, it might even turn out to be a less fatalities, but more injuries type of situation. That edge is going to be the key factor.

        Less deaths wouldn’t excuse more injuries though. I half wonder if the NHSTA will eventually force Tesla to add some sort of rounded plastic thing around the front edges.

        Edit: I just want to clarify on the injury/death ratio, I don’t mean that the deaths just turn into injures, but that there is actually more injures. Like if there was 100 pedestrian accidents, and other trucks were 10deaths/20 serious injuries, that the CT might be 5 deaths / 50 serious injuries.

        • TranscendentalEmpire@lemm.ee
          link
          fedilink
          arrow-up
          13
          ·
          4 months ago

          Any thoughts on how the plastic bumper at the bottom might impact that? Do you think that might make any difference at all? You’re still going to hit the metal parts regardless, but that initial impact might be plastic

          It may prevent some of the older type injuries where you get your calves scooped off in a parking lot, but it doesn’t really look like it protrudes out far enough to help out in any other way.

          really wanna see a 3rd party agency test this so we can finally get some answers, but with the lower front/angle, but the metal/front edge, it might even turn out to be a less fatalities, but more injuries type of situation. That edge is going to be the key factor.

          From what I understand they won’t be allowed in Europe due to their increased protections in pedestrian safety standards. Not sure if they did actual testing, or they just didn’t meet the minimum standards.

          • NotMyOldRedditName@lemmy.world
            link
            fedilink
            arrow-up
            1
            ·
            4 months ago

            From what I understand they won’t be allowed in Europe due to their increased protections in pedestrian safety standards. Not sure if they did actual testing, or they just didn’t meet the minimum standards.

            I’m pretty sure that’s the case yes. The front doesn’t meet the required safety requirements.

    • 🔰Hurling⚜️Durling🔱@lemmy.world
      link
      fedilink
      arrow-up
      18
      ·
      4 months ago

      That’s not entirely accurate, a cyber truck has adaptive suspension that can lift the truck as much as what you’d get on a 6" lift. In the Pic you are showing it’s at it’s lowest position.

        • shadeless@discuss.tchncs.de
          link
          fedilink
          arrow-up
          12
          ·
          edit-2
          4 months ago

          That’s not a real picture, the Tesla is photoshopped in (and a bad render at that, not even a picture of a real cybertruck).

          • NotMyOldRedditName@lemmy.world
            link
            fedilink
            arrow-up
            10
            ·
            edit-2
            4 months ago

            Jesus fucking christ, how did i not see that until you pointed it out. I was just picking pictures out of search result gallery. I thought it was odd one wheel was on a platform but didn’t see how fake it was.

            This is one from a video of 2 real trucks with the CT being lower while also not in the lowest suspension position.

            Edit: Which also conveniently shows how high it would impact this person for each vehicle lol

      • NotMyOldRedditName@lemmy.world
        link
        fedilink
        arrow-up
        4
        ·
        4 months ago

        It’s still lower than many other trucks even when higher. This is the driving position and the most efficient for aero. They could drive in higher modes though yes.

    • FuglyDuck@lemmy.world
      link
      fedilink
      English
      arrow-up
      17
      ·
      edit-2
      4 months ago

      It also has sharp corners that will ruin your day- instead of Bouncing off fairly flexible body panels, that are round and blunt, you’re getting nailed by rigid, sharp corners.

      Which concentrate what force is there.

      • NotMyOldRedditName@lemmy.world
        link
        fedilink
        arrow-up
        3
        ·
        edit-2
        4 months ago

        Well that’s my comment about getting cut in half.

        But it’d almost be certainly be better to get hit by a lower, slanted shape even if solid than a slightly flexible higher flat wall

        Higher is bad in general and many trucks are comically high.

        • FuglyDuck@lemmy.world
          link
          fedilink
          English
          arrow-up
          6
          ·
          4 months ago

          It’s not that you’d be cut in half.

          It’s that the force of the impact is concentrated onto a single point. (Specifically the corner.)

          Also, kids exist and are more likely to not be seen, shorter doesn’t much help them.

          Being shorter is one thing, but that’s just a whataboutism. The design of the CT is broadly unsafe, from drive by wire systems that insert delayed control signals, to shitty suspension that can’t handle hard and sudden braking under any kind of real load, to tires that get cut by its own hub cover, to lethal body panels and being ridiculously heavy.

          • NotMyOldRedditName@lemmy.world
            link
            fedilink
            arrow-up
            2
            ·
            edit-2
            4 months ago

            I mean… the meme is that the front edge is going to cut people in half and be deadly. And we agree that’s probably a problem that we’ll need to see crash data from. But that’s just one part of the front of which others are arguably safer.

            Kids will get killed by all trucks regardless. Having the front impact heads in an accident is a losing proposition for everyone and doesn’t have any relevance in the discussion.

            The rest of that is all meaningless as well until there is other data and you just grasping for straws.

      • pyre@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        4 months ago

        yeah but at least some of your body will roll right over! after the crash you can crawl to the lower half and try to stitch it back. ezpz

    • Todd Bonzalez@lemm.ee
      link
      fedilink
      arrow-up
      6
      ·
      4 months ago

      That Ford grill is made out of ABS plastic, like a big Lego.

      The Cybertruck is made out of steel, like an anvil.

      • NotMyOldRedditName@lemmy.world
        link
        fedilink
        arrow-up
        7
        ·
        edit-2
        4 months ago

        As trucks get taller, you’re more likely to get impact wounds on vital organs and pushed forward and RUN OVER which is going to be a worse time for you.

        The CyberTruck is more likely to get you onto it’s hood (unless it’s fully raised at the time), which should increase your survival chance ASSUMING that edge doesn’t increase lethality and only increases injuries.

        Edit: Also newer cars (not trucks AFAIK) even have special features within their hoods to further increase the likely hood of not getting injured. On newer Model 3’s for example it could pop up during an accident to act as a better cushion when you hit it.

        Edit: Further, and this goes for all vehicles, if you know you’re about to get hit, get your feet OFF the ground. It will reduce the friction and increase your odds of going onto the hood if it’s not a brick wall you’re hitting instead of being pushed forward/run over.