• RQG@lemmy.world
    46·
    27 days ago

    I mean, what else to spend spare money on besides the things I enjoy. Like other people spend thousands travel. I spend the same amount on a box of Warhammer. Jk. I can’t afford Warhammer.

    • Wilzax@lemmy.world
      42·
      27 days ago

      No! You’re supposed to be miserable for your entire youth by saving and investing every penny you don’t need to survive! That way you can afford all the medical bills and therapy you’ll need when you’re old and retired and have had a life devoid of joy!!

      Sigma grindset!!!

          • atocci@lemmy.world
            1·
            27 days ago

            I’m not sure yet, I’ve been researching what to buy since then and I found this guide. It sounds like a sit-on-top with a flat hull is good for beginners, and I have a preference towards nothing inflatable also.

            If you have any recommendations though, let me know! I also need to get a roof mount for my car.

            • PraiseTheSoup@lemm.ee
              2·
              26 days ago

              I don’t have any specific recommendations, and the guide from dicks seems sensible. I will say that, having used both sit-in and sit-on, I myself definitely prefer sit-in. And I’m not a pro, I mostly use mine on calm lakes and gentle streams. My only piece of advice is to not cheap out and buy some $250 piece of junk from Walmart. It’s not going to be fun and will probably turn you off of kayaking immediately. You shouldn’t have to consciously think and make an effort to stay upright, the boat should just do that on its own. I like the brand Old Town, but there are lots of good boats out there. I hope you enjoy it.

              • jaden@lemmy.zip
                1·
                22 days ago

                Oh but it’s so much more fun on a canoe trip, on rivers. Everyone trying to tip each other’s boats (except the food boat). Sit-on kayaks tip the easiest but recover quick

  • jboy@lemmy.sdf.org
    22·
    27 days ago

    “All you need is a pair of running shoes!” And another. And another. And another. Ad infinitum $$$

      • jboy@lemmy.sdf.org
        6·
        27 days ago

        Sweat-wicking shirts! Compression socks! Non-bouncing shades! UV-proof hats! Neck buffs! Trail shoes! Gaiters! Racing shoes, carbon-plated! Recovery flipflops! Base layers! Jackets, rain and windproof! Reflective gear! A smartwatch! Training plans! Runners’ memoirs! Club membership! Race signup fees! Gels! Electrolyte mix! Protein bars!

        And have you tried spirulina, it does wonders for recovery (so they say)

        • OpenStars@piefed.social
          2·
          26 days ago

          Fair, but a lot of people have emotional issues that make that difficult, and running can be a fun activity. Bonus: it helps someone learn just exactly how much that “100 calories” is worth - by converting into a measurement system that they already know (time to burn it off), it can help to prioritize eating goals in the future.

          Exercise also has many other benefits beyond weight control though, such as heart health, overall musculature, blood chemistry, and more. thin != healthy.

          But if we are getting this deep into it, running in particular isn’t the best… it’s quite hard on the knees I hear. An elliptical machine or something involving the body core like calisthenics would be easier on the body and more effective at the same time. Then again, running sure is fun… :-D

    • I Cast Fist@programming.dev
      2·
      27 days ago

      Or go for the cheaper alternatives. Or just buy a 3D printer, so you can have beautiful, unpainted armies that’ll never see any action, just like 70% of all GW models!

    • cRazi_man@lemm.ee
      16·
      27 days ago

      Many hobbies are cheap if you choose wisely out of your possible interests; and then go with cheap, good enough options rather than getting swept up in online echo chambers (where nothing less than top tier is acceptable).

    • Todd Bonzalez@lemm.ee
      4·
      27 days ago

      lmao, what? Ground floor for building a usable gaming PC is $1,000. A lot more if you want to play new games with decent graphics.

      And those games cost money too.

      Realistically you’re spending $5,000 on a nice PC, monitors, speakers, accessories, and a collection of games. You’re going to need upgrades and additional games over time so even more money.

      • Ogeon@programming.dev
        13·
        27 days ago

        A relatively cheap PC with Factorio and you are set. You won’t spend much on food either, so win-win.

      • 𝔼𝕩𝕦𝕤𝕚𝕒@lemmy.world
        10·
        27 days ago

        5k? I don’t believe it. When in get home I’ll total up my setup and compare notes

        EDIT- So I bought some stuff at different prices than you’d get today (cough GPU) so I will list a few prices for.

        PC Hardware

        • Intel i5 10400 - $180

        • RAM 16GB DDR4 - $40

        • Mobo - $180

        • NVIDIA GeForce RTX 3060 (Used on ebay) - $215, New is about $450

        • AverMedia HD2 Capture Card - $150 (now $99)

        • PCIE Wifi Adapter (Amazon) - $20

        • 250Gb SSD (system and files, gift) - $80

        • 2Tb HDD (Games, tried to save on budget) - $80

        • PSU - $120

        • Total Spent - $985

        • Total Value - $1300

        Peripherals

        • 40" TV - $200 new at time, got on clearance for $100. Now ~$130-150
        • 24" gaming monitor (used) - $200 retail discontinued, paid $120 used, $100 on ebay now
        • 4 Hard Drive dock (gift) - $100
        • RGB keyboard pad (gift) - $40
        • keyboard base - $120
        • White switches - $40
        • Custom etsy keys - $40
        • Logitech mouse - $80
        • USB Hub (Ebay) - $37
        • Stream Deck (Ebay) - $80
        • Microphone (Used Ebay) - $70, new is $140
        • Headphones -$100

        Total Spent - $787 (927 if free was included)

        All in - I’m at about $2k and can run Space Marine 2 and Warzone.

        • Etienne_Dahu@jlai.lu
          7·
          27 days ago

          I don’t buy it either. My PC + an upgrade 3 years later (with a Ryzen 5800X and a used RTX 3090!) cost me about €2,000. If you want to push it, you add the TV (€1,000) because it serves as a monitor and the whole home cinema setup because the computer is hooked to it (probably about €1,000 as well).

          That’s 4k and I’m stretching it. Buy a good monitor for €300, monitoring speakers or headphones for €250 and you’re already set for a high end experience.

          As for games… C’mon, y’all know we sail the high seas.

      • Zos_Kia@lemmynsfw.com
        9·
        27 days ago

        That’s only if you are in the subset of PC enjoyers who like state of the art equipment, expensive accessories and expensive recent games.

        I consider myself a PC nerd but 5K is more than I spent in the last 10 years on the hobby. I’ve built my main rig for <1K, own a few raspberries and my home server is an old work laptop. It absolutely doesn’t have to be an expensive hobby.

  • SomeGuy69@lemmy.world
    17·
    27 days ago

    Gaming used to not be like that, but now a good GPU alone costs 800 to 2500 bucks. Sure you get away with cheaper components but at what cost, you got to be patient gamer to enjoy this endeavor.

    • puppycat@lemmy.blahaj.zone
      2·
      26 days ago

      my gpu is 8 years old, and it runs everything perfectly. I’ve never had any issues with high quality shaders in Minecraft, and i have a million mods in Teardown and i don’t really see it lag unless im testing my PCs limits lol

      i really really don’t think you need to spend nearly that much money to enjoy video games

    • Yerbouti@sh.itjust.works
      2·
      27 days ago

      My 15 years old i5 750 upgraded with a 1060 can play almost anything. You could literally play great free games for the next 10 years on it without spending a dime. Maybe some gamers are doing too much? There’s no need to upgrade your pc every years to get 2 more fps…

  • Catoblepas@lemmy.blahaj.zone
    16·
    27 days ago

    Be sure to see if your local library or community center has hobby stuff to check out or cheap classes! YMMV depending on how well funded they are, but it’s becoming really common to have a 3D printer, specialty baking pans, tools, etc.

    • DokPsy@lemmy.world
      6·
      27 days ago

      Bruh. 3d printing is a mildly expensive gateway hobby that funnels things into other hobbies

      • Catoblepas@lemmy.blahaj.zone
        4·
        27 days ago

        It’s free at my local library because it’s new. Their cost plan for when they start charging is free for the first 3 hours of printing and then a max of $10 for a 10 hour print.

  • LovableSidekick@lemmy.world
    12·
    27 days ago

    Can be true but like all things it depends. In the 6 years I’ve been into 3d printing I’ve observed that lots of people compulsively mod their machines. I just print stuff. Filament is cheap and I use free online software to do designs. The repair parts I’ve made have actually paid for the machine by being able to keep broken stuff instead of replacing them. But I’m cheap. I think people who are determined to spend money will find a hobby to spend it on.

    • Jumi@lemmy.world
      4·
      27 days ago

      As someone who learned subtractive machining (milling, turning etc) I find additive machining very interesting. My friend bought a cheap printer recently and I’m excited to try it out.

    • ealoe@ani.social
      3·
      27 days ago

      Never understood the obsessive tinkerers, all that work to have something worse than a Bambu P1S. To each their own ig, I just see my printer as a means to an end I don’t want to mess with it. I want to mess with the stuff I build with it

      • LovableSidekick@lemmy.world
        1·
        26 days ago

        TBH the 5 years I spent tinkering with my Ender 3 were a lot of fun. Overcoming the little problems and getting the settings right was always satisfying. But at some point enough was enough. My A1 is like a little robot wizard - I hand it a file, it conjures me an object and plays a little song when it’s ready. I’m loving it!

        • ealoe@ani.social
          2·
          26 days ago

          I also started with an Ender 3 and it taught me a lot but I am glad to have a little wizard machine now

  • dependencyinjection@discuss.tchncs.de
    10·
    26 days ago

    My hobby is hobbies. I start something spend whatever money I want whilst it entertains me and then drop it without reason and move on to something else. Some I will come back to years later.

    The curse of ADHD.

    When friends comment on my ever changing hobbies and dropping them, my reply is simple; it’s the journey for me and not the end goal.

    Current hobbies and durations:

    • Rubik’s Cube - 6 years
    • Indoor bouldering - 4 months
    • Running - 25 years on and off, currently off.
    • Lego - 1 week. Only have one set. The Bonsai Tree.
    • 3D Printing - 2 years but off right now until I can get a new printer that isn’t so high maintenance.
      • dependencyinjection@discuss.tchncs.de
        6·
        26 days ago

        I’m not sure if you’re being serious right now and it doesn’t help that my Greek mythology knowledge is severely lacking (something I’ve wanted to learn more about).

        So in case you don’t know what I’m talking about, indoor bouldering is like indoor rock climbing but not so high you need a belay system. Also, the climbs imitate boulders and so you might climb with all the holds being above your head, like the top of a cave.

        As an expert in hobbies, I can honestly say this is freaking amazing. It’s got physical activity mixed in with problem solving and all the people I’ve talked to are super nice too (geeks, we are all geeks). If anything like me I find it hard to turn off my mind; this does that for me though. It’s meditative for me.

        • AnUnusualRelic@lemmy.worldEnglish
          4·
          26 days ago

          A bit after I posted, it occurred to me that it could’ve been that, but I was too lazy to edit my post.

          I’m no a native English speaker, so I didn’t think of it at first, sorry. Also I kind of liked the idea of a hobby where you rolled large boulders in your home.

          • dependencyinjection@discuss.tchncs.de
            2·
            26 days ago

            No problem. I just want to say your English is amazing for a non-native speaker / writer.

            Also, I carry my burdens around the home like Sisyphus so there is that 😂.

    • DokPsy@lemmy.world
      5·
      27 days ago

      I got some 35mm film cause I was playing with the idea of film based astrophotography on my 3d printed telescope and wanted to test out a few different types of film… And since the local places are charging $16+ per roll, was going to develop them myself.

      Am I doing this right?

  • Deadful@lemmy.world
    9·
    26 days ago

    I got a couple Rubik’s cubes for my kids a few years ago for nostalgia and they didn’t want anything to do with them once they realized it wasn’t easy to fix.

    I tried to encourage them to keep plugging at it but they said “how am I supposed to do this if you can’t?” I realized they had a point so I downloaded an illustrated book that takes you step by step through the beginner method, and after a couple of hours I solved it!

    I felt like I had climbed Everest and the first thing my kids did was scramble it again as soon as I showed them. That was the beginning of me getting into cubing as a hobby, and I have to say it’s one of the LEAST expensive hobbies I’ve ever been a part of!

    Like with any hobby there are entry-level cubes and then enthusiast cubes that are more feature-rich and expensive. But the Delta between the two is surprisingly small. The cube that I use the most is one that has won world records and it was about $20 I think?

    I have bought several variations of the 3X3 and other form factors. I have also bought a few as gifts as well as a Bluetooth connected cube with an accompanying robot and I don’t think I’ve spent more than $300-$350 total for the lifetime of the hobby.

    That said you could easily be competitive with a world class cube, a timer, a mat, and some “Cube Lube” for maintenance all for about $60-$80 no prob. It’s about the only hobby I have my wife fully endorses, lol.

    • beastlykings@sh.itjust.works
      3·
      26 days ago

      I was reading your post and I briefly thought you were trying to say it IS expensive, not that it is not. And I was like is this guy on crack, cubing is cheap as chips.

      Anywho, glad to see I was wrong. I learned cubing at the same time as my buddies kids did, and while I never got faster than I think a minute and a half? They are well under a minute now, it’s crazy.

      I still cube occasionally, but mostly just to fidget while watching TV 🤷‍♂️ Also so I don’t forget how to do it.

      • Deadful@lemmy.world
        2·
        26 days ago

        Yeah, it’s cheap. Sorry for the lack of clarity and brevity. Lol.

        I couldn’t get any faster than about a minute and a half using the beginner method so I decided to try learning CFOP. At first I got way slower because there are more algorithms to remember but I saw how some others have modified it a bit to make it simpler and practiced when I could (i.e. watching TV like you lol) and now I can solve it in about a minute.

        That’s clearly not competitive in any way but I’m really just competing against myself so I’m happy with any Improvement. That’s light years better than where I started and to people that don’t know there are 11-year-olds online doing it in 8 seconds, my one minute is pretty impressive! 😂 Happy cubing, my friend!