• Trailblazing Braille Taser@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    308
    ·
    11 months ago

    The renewed focus on reliability is motivated by emerging applications. Imagine a wireless factory robot in a situation where a worker suddenly steps in front of it and the robot needs to make an immediate decision.

    This example is a real WTF. I really hope nobody is planning on building safety-critical real-time systems on top of WiFi!

    • Thrashy@lemmy.world
      link
      fedilink
      English
      arrow-up
      48
      ·
      11 months ago

      I don’t know about manufacturing environments but I deal with laboratories a lot, and I’m a bit baffled at how quickly lab operators have jumped on battery-operated wifi sensors for lab monitoring systems. I have like three room sensors attached to my EcoBee thermostat at home and I can barely be assed to change the batteries in those things, I cannot imagine dealing with batteries and connectivity troubleshooting for a building full of sensors whose reliable operation is often critical for regulatory compliance. Seems like the perfect application for PoE systems, to me

      • Magrath@lemmy.ca
        link
        fedilink
        English
        arrow-up
        17
        ·
        11 months ago

        In industrial there are very few wireless systems unless they are either too remote from the CPU and aren’t safety sensitive. Safety is taken very seriously because any incident can mean injuries/death and ending up in the public eye. Any safety systems are hard wired because of reliability.

    • Flying Squid@lemmy.world
      link
      fedilink
      English
      arrow-up
      20
      ·
      11 months ago

      I really hope nobody is planning on building safety-critical real-time systems on top of WiFi!

      Are you new to the planet? Let me tell you about this thing we have called capitalism…

    • abhibeckert@lemmy.world
      link
      fedilink
      English
      arrow-up
      19
      ·
      edit-2
      11 months ago

      If your robot moves around, then it needs a wireless connection. And it doesn’t really get any more reliable than wifi. I’m certainly not going to outsource that to a Verizon cellular connection.

      And even for things that can be wired - ethernet is far from reliable. Cables are easily damaged or simply unplugged.

      Wifi can work really well, especially with high end networking gear (and not, for example, the wifi access point you get for free from Verizon).

      • Couldbealeotard@lemmy.world
        link
        fedilink
        English
        arrow-up
        34
        ·
        11 months ago

        I think you’ve missed the point.

        Anything automated that could be a threat needs to have safeguards. Needing constant wifi to prevent death or injury is not an acceptable safeguard.

        Consider consumer/professional drones. If they lose connection they have on board protocols to mitigate hazards. Even then they are still governed by laws to isolate then from people because even those safeguards aren’t good enough. Suggesting that a robot could completely rely on wifi is preposterous.

      • jonne@infosec.pub
        link
        fedilink
        English
        arrow-up
        30
        ·
        11 months ago

        I think the point is that that sort of safety critical stuff should be on board, not relying on a wireless connection.

        • XTornado@lemmy.ml
          link
          fedilink
          English
          arrow-up
          5
          ·
          edit-2
          11 months ago

          Yesh it should be self contained. Although to be fair there shouldn’t be a way for a human to be there to begin with.

      • neclimdul@lemmy.world
        link
        fedilink
        English
        arrow-up
        14
        ·
        11 months ago

        As someone using various wireless standards over over twenty years and in IT dealing with wifi instability on basically a daily basis. No.

        Wifi is a series of compromises to be convenient. It’s “good enough” for most of those but generally and increasingly in newer standards, the compromise is to drop stability for things speed. You’ll see this to be the case in a lot of professional wifi gear that will transfer you to a lower standard if it sees weaker signals to improve stability.

        To make that concrete, a problem with wifi in an office is an embarrassing “I’ll call back on my phone” but a factory floor that could be millions of dollars of downtime to restart an entire chain of machines. Hardened industrial wiring and connections is well established and wifi is just not at that level. The poorly formed example of the robot was trying to convey their intention to start addressing that level of hardening.

        All that said, based on my experience reading ieee articles this is all exaggerated. in reality we’re probably just getting more stable video calls at higher bandwidths. Still a win for the help desk techs everywhere and people with a heavy wall making Netflix flaky.

    • Linkerbaan@lemmy.world
      link
      fedilink
      English
      arrow-up
      11
      ·
      edit-2
      11 months ago

      As long as they have a delay counter which immediately shuts the robot down when it hasn’t been answered within a certain time period it shouldn’t pose much of a problem if it has an E stop. Just inconvenient when it keeps shutting down all day.

    • Kbobabob@lemmy.world
      link
      fedilink
      English
      arrow-up
      9
      ·
      edit-2
      11 months ago

      This sounds like they’re talking about something specific. There was a guy that was picked up/crushed by a robot recently that is eerily similar.

    • djdadi@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      ·
      11 months ago

      I work in autonomous vehicle engineering. That’s not even on the table for something we’d consider doing. But China is trying to enter the market hard, and I am less sure they wouldnt do that.

    • stolid_agnostic
      link
      fedilink
      English
      arrow-up
      1
      ·
      11 months ago

      Showing bad safety practices isn’t a fit way to convince me lol.