The DSR-150 is still being sold on Amazon under the D-Link store. Why the hell would you end of life something you still sell.
Technically most if not all Amazon sellers are third party who sell to the warehouse and then it sits there until its listing contract expires.
Thats why Rode Microphone refuses to sell on Amazon.
Don’t want to get lumbered with a bunch of old stock now, do you?
Be nice if companies had to open source firmware they are going to EoL.
Not going to hold my breath that anything like this will happen in the current political climate, but yeah, that should be mandatory. Even ignoring the exploitive nature towards their customers, it creates a ton of unnecessary waste.
I mean, some of those EOLed nearly a decade ago.
You can argue over what a reasonable EOL is, but all hardware is going to EOL at some point, and at that point, it isn’t going to keep getting updates.
Throw enough money at a vendor, and I’m sure that you can get extended support contracts that will keep it going for however long people are willing to keep chucking money at a vendor – some businesses pay for support on truly ancient hardware – but this is a consumer broadband router. It’s unlikely to make a lot of sense to do so on this – the hardware isn’t worth much, nor is it going to be terribly expensive to replace, and especially if you’re using the wireless functionality, you probably want support for newer WiFi standards anyway that updated hardware will bring.
I do think that there’s maybe a good argument that EOLing hardware should be handled in a better way. Like, maybe hardware should ship with an EOL sticker, so that someone can glance at hardware and see if it’s “expired”. Or maybe network hardware should have some sort of way of reporting EOL in response to a network query, so that someone can audit a network for EOLed hardware.
But EOLing hardware is gonna happen.
all hardware is going to EOL at some point, and at that point, it isn’t going to keep getting updates
EOLing hardware should be handled in a better way
Both of these are solved by one thing: open platforms. If I can flash OpenWRT on to an older router then it becomes useful again.
Bingo.
Either support the device until the heat death of the universe, or provide consumers with the access to maintain it themselves.
But neither of those help corporations make them all the money. So we need regulation to force them to.
Regulation? I think you mean “guillotines”…
Definitely don’t this in the past (Linksys WRT54G!) but let’s be honest, the kind of people running 10yo Dlink routers aren’t going to flash new firmware, let alone OpenWRT or even know to look for it. It would have to come that way from the factory. And even then I doubt most people even do regular updates, sadly.
This is the correct reaction to old home equipment.
Right?
Something this old is going to be power inefficient compared to newer stuff, and simply not perform as well.
I would know, I just booted up a 10 year old consumer router last night, because the current one died. It’ll be OK for a few days until I can get a replacement. Boy, is this thing slow.
My cat likes how much heat they make too.
I have a netgear router that isn’t even that old and it doesn’t have gigabit ports.
even though I was able to throw openwrt on there to mess around with it’s still e-waste
I think there should be a handoff procedure, or whatever you want to call it.
As EOL approaches, work with whatever open router OS maker is available (currently OpenWRT) to make sure it’s supported, and configs migrate over nicely. Then drop one last update, designed to do a full OS replacement.
Boom, handoff complete.
I’d support a regulation that defines either an expiration date or commitment to open source at the time the hardware is sold.
EoL of anything should mean open source code. You don’t want to open source your code? Then you must keep servicing your products and must keep your servers up
When the users are in control of the software running on their devices then “EOL” is dependent the user community’s willingness to work on it themselves.
The ones with EOL 2015, fair play. But May 2024 isn’t all that long ago.
Edit: Looks like those were launched in early 2015. I guess requesting users to update devices after 8+ years might not be too far fetched.
There right you and i should just buy a new one
Of a diffrent brand
Had me in the first half
I agree. Buy a new router that isn’t Dlink.
Yeah after gettin screwed by the DLink you might as well use the TP-Link
Welp never buying anything D-Link ever again
Because they won’t support routers that were EOL a decade ago?
Companies should be forced to release all source code for products that are “EOL”. I will never change my mind on this.
Especially for stuff like medical implants
‘Sorry, your eyes are no longer supported’
May 1st 2024 was a decade ago? (The article has a list and only two are old as you mention, though not quite a decade yet)
Because that bug was so egregious, it demonstrates a rare level of incompetence.
that bug was so egregious, it demonstrates a rare level of incompetence
I wish so much this was true, but it super isn’t. Some of the recent Cisco security flaws are just so brain-dead stupid you wonder if they have any internal quality control at all… and, well, there was the Crowdstrike thing…
Idk, this was kind of a rare combination of “write secure function; proceed to ignore secure function and rawdog strings instead” + “it can be exploited by entering a string with a semicolon”. Neither of those are anything near as egregious as a use after free or buffer overflow. I get programming is hard but like, yikes. It should have been caught on both ends
Some of the recent Cisco security flaws are just so brain-dead stupid you wonder if they have any internal quality control at all
At the super budget prices Cisco charges, do you really expect quality control to be included? You’ve got to buy a quality control subscription for that. /s
Most reached EOL in may of this year.
EOL is still EOL
I had a couple of dlink gigabit desktop switches. Two failed so far, one has taken down the whole network, not just devices directly connected to it, and the other one fried 2 router ports when it died. I learned my lessons about buying crappy network hardware.
Edit: that happened within a few months, so these switches also have a very clear EOL.
I mean this is pretty standard in all industries regardless of whether it’s a software flaw or a physical flaw in any other kind of product. What’s the likelihood of a vacuum manufacturer replacing a part in a 15 year old product that had a 1 year warrantee even if it’s a safety issue? Sure the delivery and installation is cheaper with software, but the engineering and development isn’t, especially if the environment for building it has to be recreated.
I work for a manufacturer with part catalogues going back to 1921, and while the telegraph codes no longer work, you could absolutely still order up a given part, or request from us the engineering diagram for it to aid in fabricating a replacement. You can also request service manuals, wiring diagrams, etc. Don’t all half-decent manufacturers do this?
Don’t all half-decent manufacturers do this?
No. That is phenomenally uncommon. To the point it’s almost unheard of.
Yes they do, but half decent manufacturers are extremely rare.
Now I wish you’d tell us what the company is so if I ever need anything in that industry, I’d know where to buy from.
That’s assuming you’re looking for a replacement part. This is redesigning the product to work differently to fix a flaw. Like if you made a vacuum company use a different gear because the existing one was too fragile. That’s likely not something you can just swap out. First you need an engineer to decide what kind of gear and redesign everything around it to make the gear fit properly as well as creating a way for it to be easily installed by the end user or their repair service. You’re ultimately changing the functionality of the original product. Yes it’s flawed functionality, but there are tons of flawed products out there.
This is why a number of countries have laws saying spare parts must be made available for a number of years past being sold. Well beyond what the warranty is.
How is this significantly different?
I’d also settle for releasing 3D models of out-of-production parts so they can be 3D-printed by enthusiasts.
Story time: in my second-gen Mazda Miata, I closed the centre console lid on a piece of cardstock by accident and it snapped the plastic piece that latches the lid shut. The part previously sold for ~$10 but they stopped producing it as a standalone part at some point and the only way to acquire it was to buy the $100 centre console lid assembly.
This isn’t spare parts. This is asking for a new part to be designed and manufactured to replace an existing part. That takes time and money. Granted software doesn’t require mass production, but creating the initial version does take expertise and resources that may no longer exist in addition to the time and money.
What you’re saying is perfectly reasonable, but also doesn’t apply here because they’re still selling this router new on the D-link Amazon store.
If you’re going to stop supporting a product, you should also stop selling it.
As far as I can tell, those aren’t from authorized resellers or even from Amazon itself which they might have some ability to stop selling them. These are just people who are using amazon marketplace to sell off old stock like any other product. D-link hasn’t sold them for a while. But I could be wrong, I just haven’t seen any evidence that they are selling them. If Bissel had a vacuum that had a faulty gear that would break after a few years of use and they stopped making them, that wouldn’t stop someone from buying them up from Walmart or other store warehouses that no longer sold them and listing them for sale on Amazon or Walmart or whatever marketplace. That’s very common.
Our shit sucks. Buy more lol
Can highly recommend ASUS, most of their models can be flashed with custom firmware that is supported beyond EOL. And their EOL cycle is also pretty long.
don’t buy shit unless it runs openwrt or whatever
Except ISPs dont give you modems anymore, they give router/modems you can have the router you want but you are forced to use the one they give you
Unfortunately this is the case I’m seeing happening more. I would love to use a router of my choice, but then I would lose the TV service (Telekom, Hungary). And it’s not just about the freedom of mine to choose the hardware, but the features their one is lacking.
Also with the TV box I got from them 2 yrs ago, I can feel and see that’s is miles behind my 2015 (!) Shield TV.
So yeah, ISPs giving out crappy hardware and force you to use it, is my nr. 1 gripe.
but does it run openwrt?
e: no it doesn’t, only one model had half-baked image made and available for download from some sketchy forum post made in 2014
Long ago, D-Link was good but then they sold the company. Just like Alienware, Farbreware, Oaklies, etc.
I moved to an OPNsense router a couple of years ago and I’ve never looked back. Hell is shitty consumer routers.
Do you have any recommendations on OPNSense routers?
Oh man, it’s a nightmare and I just happened to be lucky. I ended up buying one of those passively cooled router-esque N100 boxes out of China (AliExpress) and while it was a total punt it turned out to be a great experience, and their customer service was actually good too.
Kingdel was the make/vendor and it’s been rock solid.
This is the way.
Why do they say they’re prohibited to provide support? That a bad translation?
No mercy from Low Level.
I watched and enjoyed that one yesterday, and he’s bang on the money. People here are saying “well it’s EoL” but that means it’s got all the way through development and its full lifetime with such a prominent set of bugs.
I don’t think I’ll be buying D-Link if that’s what supported means.
